WSP-2000 FAMILY
|
| Magnuson Corporation today manufactures a full line of peelers to be able
to match peeler size to production capacity. The WSP-2000 family consists of five
machines with two different roll sizes: |
| WSP-2046: |
4 rolls, 6-inch diameter roll |
| WSP-2063: |
6 rolls, 3-inch diameter roll |
| WSP-2066: |
6 rolls, 6-inch diameter roll |
| WSP-2086: |
8 rolls, 6-inch diameter roll |
| WSP-2123: |
12 rolls, 3-inch diameter roll |
|
| All of the machines in the family are hydraulically
driven. Each roll has its own hydraulic motor. One control valve is used to
adjust roll speed. All hydraulic plumbing is completed at the factory. Only
two connections are required at the installation: electrical and water. The
two roll sizes mean the peeler can be configured for the product size. |
|
|
|
|
MACHINE STANDARDS
| WSP-2046 |
4 rolls, 6-inch diameter roll standard with:
2 abrasive, 2 brush rolls, discharge gate
|
|
| WSP-2086 |
8 rolls, 6-inch diameter roll standard with:
8 abrasive rolls, discharge gate
|
|
| WSP-2063 |
6 rolls, 3-inch diameter roll standard with:
3 abrasive, 3 brush rolls, discharge gate
|
|
| WSP-2123 |
12 rolls, 3-inch diameter roll standard with:
12 abrasive rolls, discharge gate
|
|
| WSP-2066 |
6 rolls, 6-inch diameter roll standard with:
3 abrasive, 3 brush rolls, discharge gate |
|
Brush rolls or abrasive rolls can be used interchangeably to meet
the application requirements. |
|
|
NF FAMILY SUMMARY
| Magnuson Corporation has been manufacturing peeling machines for 30
years. The performance provided by rotating cage, with counter-rotating rolls and
full length auger, is unbeatable. Today, the Magnuson NF-24 is much less costly to
maintain. Most important, the performance provided with the full rotating cage,
counter-rotating rolls and full length auger for controlling residence time has been
maintained. Some of the improvements are:
|
| Water lubricated bearings (3-4 gpm per machine), only 6 grease
points of the new machine (vs. 60 grease points on old unit), ring gear supported by water
lubricated plastic bearing (like rolling bearings), all stainless steel frame, overhead
motors with speed controlled by electronic frequency controllers. |
MACHINE STANDARDS |
NF - 24 |
NF - 18 |
| 24 each 3-inch diameter abrasive rolls |
18 each 4-inch diameter brush rolls |
| OPTIONS |
OPTIONS |
3-inch diameter brush rolls
2 7/8-inch diamter abrasive rolls |
4-inch diameter abrasive rolls
3-inch diameter abrasive rolls
Soft rubber disc rolls |
|
|
|
|
|
